Know you need a designer but not sure how it all works? No problem. Below you’ll find olliePop Design’s unique 3-phased approach to running a design project. We can’t wait to work with you and are happy to answer any questions you may have about our process.


Phase 1 : Brainstorm + Meet-n-Greet: $200


These sessions are fun and you'll get a lot of good feedback and takeaways from our first meeting. At this session we see your space, learn about the project, your design preferences, budget, etc. We have fun and do a bit of brainstorming. Our clients tell us that this meeting is hugely beneficial to them as it helps to bounce their ideas off a professional and get instant design feedback and direction. We get a chance to meet each other and decide if it seems like a good fit. And if it is, we have enough information now to determine the budget for Phase 2.



Phase 2: Design Plan: $1500* + per room


During the design plan phase we settle on an overall look and feel for the space as well as on the layout. The design plan gives us our marching orders for final material selection but doesn't necessarily nail down each one.  Why? Because some folks want us to choose final materials while others want to spend hours searching on their own then ask us to give the thumbs up or down. Others land somewhere in between. Everyone is just so different that once we've got this phase nailed down, we jump to Phase 3.

We have 3 unique ways to convey the final design plan and cater to what's best for you. While each gets us to the same outcome, they each have their own strength and weakness as to how well they convey different aspects of design. Take a look at the 3 options below then we'll work with you during the initial Meet-n-Greet to finalize which direction is best for you. 

*Simple and/or small rooms start at $1500.
More complex rooms such as a kitchen or bath, or a large attic/basement finish cost more.
Models and blueprints take a lot more time to create so cost more.

1: Moodboard

Pros: Fast to create. Great at showing colors and textures. 

Cons: Doesn't convey layout

The moodboard is used most often and usually combined with a sketch or 2. 

Cassi_Kid Bath Moodboard.jpg
olliePop_Office Moodboard.jpg

2: Sketch

Pros: Fast to create. Great for showing layouts or elevations of a part of a room (such as what a wall of bookcases may look like). Kitchen and bathroom sketches are often used to convey the overall layout (such as 18" base cabinet here. 42" there) and can be given to vendors to plug into their CAD programs to generate 3D renderings. Sometimes we don't have to go so far as to create a blueprint for a contractor or city permits and a sketch will suffice. 

Cons: Doesn't convey materials. Not as detailed as a blueprint or 3D model.

Sketches are often combined with a moodboard. 

Claire vanity wall.jpg
Berglin Kitchen.png
Cassi Fireplace Room Layout.jpg

3: 3D Model + Blueprints

Pros: 3D models and/or blueprints are very time-consuming and therefore cost the most. But, they're a great tool to visualize large remodels, finishing spaces such as an attic or basement, or showing what a space would like with a wall (or 2!) opened up. They're also needed by the city for permitting purposes or by contractors to do the build-outs. 

Cons: 3D models are great at showing materials, but they don't have the vibrancy of a moodboard. Blueprints are more labor intensive than a quick sketch to show the layout. 


1_Banger Living Room.jpg
Screen Shot 2018-02-02 at 3.36.48 PM.png
NW corner looking SE.jpg


Phase 3: Material Selection + Construction : $95/hr

Once we've settled on an overall design plan, we move into final material selection and the buildout of your space. And as mentioned above, people are all over the board as to how they like to pick out their final materials. Some want us to do it all, others want to do it all, and most are somewhere in between.

 This phase is also when construction is underway. We'll work with you and the contractors to ensure the design plan comes to life as expected from final location of outlets and switches to the "Oh shoot, we demo'd this wall, uncovered some hidden pipes that can't move, and now we need to tweak the room's layout."  

Because every project and person is unique, it's impossible to put together a blanket cost for this phase that'll work for everyone. So instead we create a bucket of hours from which to pull, and do our best to estimate up front how many we think it'll take. This way you have a pretty good idea of what the total may be, but can use more or less if needed.



Homeowners, buyers, sellers and renters all have unique needs. Contact us with a bit about your project. We look forward to hearing from you.